Argox AS-8020CL Manual de usuario descargar pdf (Pagina 59)

Scan

Scanning mode:

Good-read off-The trigger button must be pressed to

activate scanning. The light source of imager stops scanning

when there is a successful reading or no code is decoded

after the Stand-by duration elapsed.

Momentary-The trigger button acts as a switch. Press button

to activate scanning and release button to stop scanning.

Alternate-The trigger button acts as a toggle switch. Press

button to activate or stop scanning.

Timeout off-The trigger button must be pressed to activate

scanning, and imager stops scanning when no code is

decoded after the Stand-by duration elapsed.

Continue-Imager always keeps reading, and it does not

matter when trigger button is pressed or duration is elapsed.

Test only-For test of scan performance only. It is improper to

be utilized to check the accuracy of transmitted data.

Double read timeout: The imager will require a several

times successful decoding to confirm the data when enabled.

The more confirming times required, the more inhibitive

miss-reading code will be shown. The Multi field scan Enable

function won’t be able to work if set Double confirm.

Double confirm: If the barcode has been scanned twice,

then only the first barcode will be accepted.

Supplement Check Counter: It will be more reliable to read

the barcode with extension (supplement) like UPCE/A or

EAN-8/13, but slow down the decoding speed when this

counter is set more.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 144 145

Sin comentarios

Argox AS-8020CL Manual de usuario Pagina 59