Argox X-2300E Guía de usuario descargar pdf (Pagina 17)

Ethernet Printer Technical Manual November 10, 2010

2. In the CONFIG’s TCP/IP submenu, you can configure how the Ethernet card assigns the IP

address to the PC and other related settings.

3. In the Maintenance submenu, you can update the firmware of the Ethernet card/printer.

 The accumulative time will be reset if the printer shuts down. You can get this information from the

default webpage (http://192.168.1.100/systeminfo/htm) or other webpage.

 When updating the firmware of the Ethernet card/printer, all status monitors including Bartender

status must be closed.

 After updating the Ethernet module firmware or changing of the IP address is complete, restart

the printer and wait for about 1 minute; you will get the latest Ethernet module firmware version

or IP address by the printer self test pages.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 50 51

Sin comentarios

Argox X-2300E Guía de usuario Pagina 17