Argox X-2300E Guía de usuario descargar pdf (Pagina 39)

Ethernet Printer Technical Manual November 10, 2010

10.4 OS-2130DE Ethernet Card Replacement

1. Turn off the printer power; unplug the power cable and the USB/Ethernet/Serial cable.

2. Remove the top cover.

3. Remove the 2 screws on the base housing.

4. Remove the whole print head assembly by releasing the 4 screws on its feet.

5. Remove the 3 screws which fix the Ethernet card as shown in the illustration below.

Figure 10.4.1

6. Place the new Ethernet card to its original position.

7. Secure the 3 screws to fix the Ethernet card.

8. Secure the 4 screws to fix “Printer Chassis” to the bottom.

9. Secure the 2 screws on the bottom of the printer.

10. Press and click “Power Switch” on the switch hole located on the “Middle Cover”.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

Sin comentarios

Argox X-2300E Guía de usuario Pagina 39