Argox CP-3140E Manual de usuario descargar pdf (Pagina 21)

Compact Printer Series - User’s Manual

hardware errors. further service.

LED Indicators: Only the Ready LED blinks

Power LED Ready LED

ON ON

ON OFF

Possible Problems Solutions

Print head needs to

cool down

Printing will stop until the print head cools to

normal printing temperature.

Once it completes, the printer will

automatically resume the printing tasks sent

previously.

Printer head module

unlatched

Close the printer module and then press

firmly at both the left and the right of printer

module to properly latch.

Printer is in

PAUSE status

Press FEED button to resume printing.

Printer is receiving data As soon as all the data has been received,

Ready LED will stay solid green and

automatically resume normal operation.

Compact Printer Series - User’s Manual

Miscellaneous

If the host shows "Printer Time out":

1. Check if the communication cable (serial) is connected

securely to your serial port on the PC and to the connector

on the printer at the other end.

2. Check if the printer power is turned on.

If the data has been sent, but there is no output from the printer.

Check the active printer driver, and see if Seagull driver for your

Windows system and the label printer has been selected.

Vertical streaks in the printout usually indicate a dirty or faulty

print head. (Refer to the following examples.)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Sin comentarios

Argox CP-3140E Manual de usuario Pagina 21