Argox CP-3140E Manual de usuario descargar pdf (Pagina 37)

Compact Printer Series - User’s Manual

7. Appendix

Rotary Cutter and Guillotine Cutter Installation

Refer to the following steps to install the cutter kit onto printers:

1. Power off the printer.

2. Open Top Cover. Remove Front Cover.

Warning: Blades inside cutters are quite sharp. To ensure your

safety, never attempt to insert fingers or objects into rotary cutter or

guillotine cutter. During all cutter operations including installation,

adjustment, or recovery from paper jam, please power off printer

first and unplug printer’s power cord.

Front Cover

Top cover

Middle Cover

Compact Printer Series - User’s Manual

3. Loose the two screws (item 2) under Bottom (item 1).

4. Pull out to unlatch the front side of Middle Cover (item 3) and then

remove it upward from Bottom.

5. Loose the four screws (item 4) at both sides of Printer Module to

take Printer Module off from Bottom.

6. Find Cutter Baby Board in cutter package (item 5), and then install

onto JP16 socket on printer main board.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Sin comentarios

Argox CP-3140E Manual de usuario Pagina 37