Argox F1 Manual de usuario descargar pdf (Pagina 27)

3. Computer Connections

This printer comes with USB interface, a standard Centronics

parallel interface, and a nine-pin Electronics Industries

Association (EIA) RS-232 serial data interface.

USB Interface Requirements

The Universal Serial Bus (USB) interface is compatible with your

existing PC hardware. The USB’s “plug and play” design makes

installation easy. Multiple printers can share a single USB

port/hub.

Centronics Parallel Port

You can connect the printer to the host computer’s parallel port

using any standard Centronics cable. The required cable must

have a standard 36-pin parallel connector on one end, which is

plugged into the parallel port located on the back of the printer.

The other end of the parallel interface cable connects to the

printer connector at the host computer. For pin-out information,

please refer to the Technical Reference in this manual.

Serial (RS-232) Port

The required cable must have a nine-pin "D" type male connector

on one end, which is plugged into serial port located on the back

of the printer. The other end of the cable connects to a serial port

on the host computer. For technical and pin-out information,

please refer to the Technical Reference in this manual.

Note:

1. Centronics allows a much higher communication speed than

serial.

2. The pin assignment of serial cable is different from PC. Please

contact your local Argox reseller if you need this cable.

Parallel

Port

USB

PS/2

Serial Port

Power Switch

AC plug

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 62 63

Sin comentarios

Argox F1 Manual de usuario Pagina 27