Argox F1 Manual de usuario descargar pdf (Pagina 53)

Password Parameters

The F-Series printer has three password levels. When you enter the setup

mode on the control panel, parameters which are not protected by password

are displayed. You must enter a correct password to enter AUTHORISED

SETUP 1 and AUTHORISED SETUP 2. The password levels and default

passwords are shown in the following table.

Password Level

Level name

Default Password

AUTHORISED SETUP 2

9999

AUTHORISED SETUP 1

1234

BASIC SETUP

No password

To enter a password when prompted, complete the following steps:

1. When the printer displays AUTHORISED SETUP X, press <ENTER>.

The LCD displays password and the number 0000.

2. Enter the four-digit password for the password level displayed or for a

higher level.

 The left <←> and right <→> buttons select the digit position.

 The up <↑> and down <↓> buttons change the selected digit’s value.

3. After entering the password, press <ENTER>.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

Sin comentarios

Argox F1 Manual de usuario Pagina 53