Argox F1 Manual de usuario descargar pdf (Pagina 56)

53

ROTATE CUTTER

This parameter allows you to rotate cutter.

Press <ENTER> to activate. Note: The

parameter shows only if a cutter is installed.

OFFSET

This option fine tunes the media stop location

TEAR OFFSET

0mm (-3~+3)

Sets label tear off offset.

PEEL OFFSET

0mm (-16~+16)

Sets label peeling offset.

CUT OFFSET

0mm (-16~+16)

Sets label cutting offset.

VERTICAL

0mm (-30~+30)

Change the vertical position of the whole

label format.

HORIZONTAL

0mm (-99~+99)

Change the horizontal position of the whole

label format.

TPH OFFSET

0mm (-3~+3)

Change the thermal print head (TPH) vertical

offset.

PRINT WIDTH

Sets maximum print width. Objects that

exceed the maximum print width do not print.

102mm (10~104mm)

The print width default value is 10mm.

DARKNESS

Adjusts print darkness for consistent high

quality printing. Press up <↑> to increase

value or down<↓> to decrease value.

8 (1~15)

The default for print darkness is 8.

SPEED

Controls the rate of label movement during

the printing process. Press up <↑> or down

<↓> to choose the value.

3IPS (1~6 IPS)

The default for print speed is 3 ips.

PRINT OUT

Prints out current printer configuration

settings, or prints out downloaded form list,

downloaded font list, downloaded graphic

list. Press the up <↑> and down <↓> buttons

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 79 80

Comentarios a estos manuales

Sin comentarios