Argox F1 Manual de usuario descargar pdf (Pagina 54)

Menu System

The menu system lets you set printer options using the buttons on the control

panel. The following is a description of menu selections and settings.

Basic Setup

Press <MENU> to enter Basic Setup Mode

Note: A checkmark  indicates the default option.

RIBBON

This parameter sets print mode for use with

direct thermal (DT) or thermal transfer (TT)

mode. Press the up <↑> and down <↓>

buttons to scroll through the selection.

YES

This option sets as the printer to TT mode.

This option sets as the printer to DT mode.

MEDIA TYPE

This parameter shows the type of media you

are using. Press the up <↑> and down <↓>

buttons to scroll through the selection.

Gap/Notch

Select for non-continuous web media,

non-continuous fanfold media, and tags.

GAP LENGTH

10mm (10~99)

Selects the gap length of labels.

MARK

Non-continuous black mark lines.

MARK

THICKNESS

10mm (10~99)

Select black mark thickness of labels

CONTINUOUS

Select for media without gaps or divisions

between labels.

TRANSMISSIVE

Select transmissive sensor 1 or 2. Press the

up <↑> and down <↓> buttons to scroll

through the selection.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 79 80

Sin comentarios

Argox F1 Manual de usuario Pagina 54